2012.02.07
Online Catalog
Enter keyword
EZ Glo Plus

$ 39.95
Shipping Costs Vary About Shipping...
Call us for Availability

EZGLO IS A HIGH GLOSS, NON-YELLOWING ACRYLIC FLOOR POLISH FOR USE ON ALL TYPES OF SEALED FLOORS. IT NOT ONLY DRIES TO A HIGH GLOSS FINISH, IT CAN BE MAINTAINED AT ULTRA HIGH GLOSS WITH HIGH SPEED BURNISHING.
Printable Version
Enviromental Impact
EZGlo Plus contains no toxic heavy metals or butyl solvents and has very low VOC's.


Applications
EZGlo Plus is used to maintain floors in a brilliant polished condition with minimal labor. All types of sealed concrete floors as well as sealed wood and composition floors will improve their appearance and decrease maintenance cost with the use of EZGlo Plus.


Benefits

EZGlo Plus: produces a beautiful high gloss, wet look shine upon drying, without buffing.

Buffs up to a super shine using high speed or Ultra High Speed burnishing. Easy to maintain with minimal labor. EZGlo Plus does not powder or dust on burnishing.

Highly detergent resistant. EZGlo Plus is not harmed by repeated scrubbing with a neutral detergent, or damp mopping between buffing.
Restore worn areas by re-coating with EZGlo Plus Just damp mop, apply and let dry.

EZGlo Plus: is highly slip resistant and meets the ASTM D-2407 requirments for slip resistance.

EZGLO: is economical. One gallon covers overs 1500sq.ft. per coat on smooth, sealed concrete, and


How To Use

Remove old polish thoroughly by scrubbing with CitraPro. Rinse floor well and let dry completely. Spread EZGlo Plus in a thin even coat over the floor using a Lambs wool applicator or a clean yarn mop. Allow to dry completely, about 25 to 30 minutes. apply a second coat and let dry completely before allowing traffic on the floor.

Damp mop with a neutral detergent as required and burnish regularly to restore the wet look. In high traffic areas, damp mop and apply a touch up coat of EZGlo Plus as required. No


Properties
Type: Super acrylic floor polish
Colors: Color, non-yellowing
Odor: Very mild
Toxicity: Low. Do not take internally
VOC’s: Low
Flammability: Non-flammable
pH: 8.5—8.9
Composition: Acrylic polymer emulsion,
ethylene copolymers, proprietary additives and
quality control agents
Material Safety Data
for EZ Glo Plus
SUPPLIER IDENTIFICATION
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
386-252-4243

Emergency Phone Number:
1-800-535-5053

EZ Glo Plus may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

NFPA
National FireProtection Association
TOXICITY [HEALTH]
1
FIRE
0
REACTIVITY
0
SPECIAL
NFPA Number Codes
4 - Extreme
3 - High
2 - Moderate
1 - Slight
0 - Insignificant

HMIS
Hazardous Materials Identification System
HEALTH
1
FIRE
0
REACTIVITY
0
PROTECTION
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
Evaluation for OSHA HCS: Non-Hazardous

GENERAL INFORMATION
Chemical Family: Mixture

HAZARDOUS INGREDIENTS

Principal Hazardous Components

Glycol Ethers (111-77-3) & 9111-90-0)
Threshold Limit Value (Units) (7% max.) NE

GlycolEther DPM (34590-94-8)
Threshold Limit Value (Units) 100 ppm skin

Ammonium hydroxide (1336-21-6)
Threshold Limit Value (Units) (1%max.) 50 ppm

PHYSICAL DATA
Boiling Point
NE
Specific Gravity (H20=1) 1.03
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume ~80
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) ~1
Solubility in Water Miscible
pH 8 - 9
Appearance & Odor: Milky white liquid, slight odor.

FIRE & EXPLOSION HAZARD DATA
Flash Point (Test Method): >200ºF (TCC)
Flammable Limits: LEL NE UEL NE
Extinguishing Media: Same as suitable for the surrounding materials.
Special Fire Fighting Procedures: Toxic gasses may be released during decomposition at high temperatures. Use self contained breathing apparatus.
Unusual Fire & Explosion Hazards: None known.

HEALTH HAZARD DATA
OSHA Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen - NTP Program No Carcinogen - IARC Program No
Symptoms of Over Exposure:
SKIN: Possible irritation.
INGESTION: Stomach upset, nausea.
INHALATION: No known effects.
EYES: Irritation, forms film that may stick eyelids together.
Medical Conditions Aggravated by Exposure: None known.
Primary Route(s) of Entry: Skin.
Emergency First Aid:
SKIN: Wash with soap and water. Remove contaminated clothing and launder before reuse.
EYES: Flush thoroughly with water, lifting both eyelids. If irritation persists, Get Medical Help.
INGESTION: Drink several glasses of water to dilute the product. Induce vomiting if directed to do so by a doctor or poison control center. Do not give liquids to an unconscious person. Get Immediate Medical Help.

REACTIVITY DATA
Stability
Stable
Conditions to Avoid: Temperature above 120ºF (49ºC) and below freezing.
Incompatibility Materials to Avoid: Strong oxidizing agents, acids and alkali’s.
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products: None known.

ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Small spills: flush to sewer with large quantities of water. Large spills: soak up on absorbent material and dispose of as non-hazardous waste.
Waste Disposal Method: Observe all local and federal regulations.

SPECIAL PROTECTION INFORMATION
Eye Protection: Recommended.
Skin Protection: Rubber gloves.
Respiratory Protection (Specific Type): Not required.
Ventilation Recommended:
General Mechanical
Other Protection: Non required.
Hygienic Practices in Handling & Storage: Wash hands after handling. Do not contaminate food or feedstuff.
Precautions for Repair & Maintenance of Contaminated Equipment: NA
Other Precautions: Read and observe all label precautions before using.



For additional information contact:
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
(866) 386-9122 - Toll Free