2012.02.07
Online Catalog
Enter keyword
Enviro Stain

Was: $ 65.00
On Sale $ 49.95
Shipping: $ 10.95
Your Cost: $ 60.90
Add to Cart

ENVIRO STAINS ARE A UNIQUE LINE OF WATER BASED, NON-ACIDIC POLYMER BONDED STAINS THAT PENETRATE INTO THE CONCRETE SURFACE TO PRODUCE VIBRANT LONG LASTING UV RESISTANT STAINS THAT ENHANCE ANY CONCRETE SURFACE.
Printable Version
''Enviro Stain'' is available in 18 different colors. Scroll to the bottom of the page to see the names of the colors.

Enviromental Impact
Enviro-Stains contain no arsenic, lead, or mercury and very low organic solvents that conform to all VOC regulations.


Applications
The Enviro-Stains are applied to any clean, cured concrete surface or concrete overlay surface. Once dried and sealed, the various colors that are applied become a permanent part of the concrete with lasting beauty.


Benefits
UV stable:
Once dry and sealed, the Enviro-Stains remain stable and resistant to weather and sun light for years.

A wide range of colors:
The Enviro-Stains at various dilutions and combinations can offer a multitude of colors and shades for any desired effect in beautifying plain concrete surfaces. This includes a true black and white.

Ease of application:
The Enviro-Stains do not require any neutralizing or labor intensive scrubbing. Once dry they can Simply be sealed. Half of the labor is eliminated.

Economical:
The stain cover up to 200 ft₂/gal and one coat is usually sufficient.

Long shelf life:
The Enviro-Stains can be stored in the original bottle


How To Use
1. Clean the concrete surface to make sure it is Free of any topical coatings, oil, grease or dirt stains. Use LunaCrete CitraPro™ or SuperGreen™ according to the problem.
2. Apply the stain with an brush, sponge, or plastic Sprayer in the color and technique of your choice. Do Not over apply and Do Not allow to puddle.
3. Allow floor to dry thoroughly. Drying time will vary According to the surface conditions and humidity.
4. Apply an LunaCrete KlearKoat™


Properties
Type: Non-acid, polymer bonded concrete stains
Colors: Various
Odor: Slight
Toxicity: Low. Harmful if swallowed
VOC’s: Low-Less than 100gm/L
Flammability: Non-flammable
Composition: Various UV stable coloring agents in An aqueous penetrating polymer binder
Material Safety Data
for Enviro Stain
SUPPLIER IDENTIFICATION
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
386-252-4243

Emergency Phone Number:
1-800-535-5053

Enviro Stain may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

NFPA
National FireProtection Association
TOXICITY [HEALTH]
1
FIRE
0
REACTIVITY
0
SPECIAL
NFPA Number Codes
4 - Extreme
3 - High
2 - Moderate
1 - Slight
0 - Insignificant

HMIS
Hazardous Materials Identification System
HEALTH
1
FIRE
0
REACTIVITY
0
PROTECTION
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
Evaluation for OSHA HCS: Non-hazardous

GENERAL INFORMATION
Chemical Family: Mixture

HAZARDOUS INGREDIENTS
Principal Hazardous Components
2,2,4-trimethyl-1,3-pentandiol monoisobutyrate (25266-77-4)
Threshold Limit Value (Units) NE

PHYSICAL DATA
Boiling Point NE
Specific Gravity (H20=1) 1.02
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume ~80
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) ~1
Solubility in Water Miscible
pH 8 - 9
Appearance & Odor: Milky liquid of various colors, slight odor.

FIRE & EXPLOSION HAZARD DATA
Flash Point (Test Method): >200ºF (TCC) Flammable Limits: LEL NE UEL NE
Extinguishing Media: Same as suitable for the surrounding materials.
Special Fire Fighting Procedures: Toxic gasses may be released during decomposition at high temperatures. Use self contained breathing apparatus.
Unusual Fire & Explosion Hazards: None known.

HEALTH HAZARD DATA
OSHA Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen - NTP Program No Carcinogen - IARC Program No
Symptoms of Over Exposure:
SKIN: Possible irritation.
INGESTION: Stomach upset, nausea.
INHALATION: No known effects.
EYES: Irritation, forms film that may stick eyelids together.
Medical Conditions Aggravated by Exposure: None known.
Primary Route(s) of Entry: Skin.
Emergency First Aid:
SKIN: Wash with soap and water. Remove contaminated clothing and launder before reuse.
EYES: Flush thoroughly with water, lifting both eyelids. If irritation persists, Get Medical Help.
INGESTION: Drink several glasses of water to dilute the product. Induce vomiting if directed to do so by a doctor or poison control center. Do not give liquids to an unconscious person. Get Immediate Medical Help.

REACTIVITY DATA
Stability: Stable
Conditions to Avoid: Temperature above 120ºF (49ºC) and below freezing.
Incompatibility Materials to Avoid: Strong oxidizing agents, acids and alkali’s.
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products: None known.

ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Small spills: flush to sewer with large quantities of water. Large spills: soak up on absorbent material and dispose of as non-hazardous waste.
Waste Disposal Method: Observe all local and federal regulations.

SPECIAL PROTECTION INFORMATION
Eye Protection: Recommended.
Skin Protection: Rubber gloves.
Respiratory Protection (Specific Type): Not required.
Ventilation Recommended: General Mechanical
Other Protection: None required.
Hygienic Practices in Handling & Storage: Wash hands after handling. Do not contaminate food or feedstuff.
Precautions for Repair & Maintenance of Contaminated Equipment: NA
Other Precautions: Read and observe all label precautions before using.

TRANSPORT INFORMATION
Identification Number Not regulated
Proper shipping name Not regulated
Class/Division Not regulated
Packaging Group Not regulated



For additional information contact:
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
(866) 386-9122 - Toll Free