2012.02.07
Online Catalog
Enter keyword
HotStrip

$ 43.95
Shipping Costs Vary About Shipping...
Call us for Availability

Hot Strip is a high impact, Emulsifiable coating remover for use on concrete floors, pavers, and ect. To quickly remove sealers. It can be used indoors or out, wherever water can be used to flush off sealer.
Printable Version
Enviromental Impact
HotStrip contains biodegradable surfactants and non-chlorinated solvents.

Applications

HotStrip is used to strip off old or heavy sealer coatings where ground in soil makes the area look dingy. It can also be used to remove the most sealers where the color change is desired. In conjunction with SuperGreen it is ideal in renovating and redoing a concrete floor.


Benefits

Emulsifying action: HotStrip not only dissolves tough to remove coatings, but the emulsifying action breaks down the dissolved coating so that scrubbing with water removes all of the old coating down to bare concrete. Nothing is left behind.

Fast action: HotStrip will penetrate and soften the old coating in 20 to 30 minutes so that it can be scrubbed up and emulsified with water and flushed off.

No neutralizing necessary: HotStrip contains no acids or harmful reactive components. Just scrub up the dissolved coating, rinse it off, and let the floor dry.
SuperGreen may be applied immediately if there are stains to be removed or to profile.

Economical: The fast acting HotStrip formula means less labor and time wasted. This saves money.

Stable in storage: Stored in its original container, HotStrip remains stable for a long periods of time.

How To Use

Turn off all pilot lights, flames or any arcing or sparking devices. NO SMOKING!!!

1. Apply HotStrip by spraying, brushing or pour on and spread evenly with a squeegee. Apply at approximately one gallon per 150 ft2.

2. Allow HotStrip to penetrate and soften the coating for at least 20 to 30 minutes.

3. add a small amount of water and scrub vigorously to emulsify the liquefied coating.

4. Heavy coatings may require a power scrubbing, or a second treatment
5. Flush off the emulsified coat, rinse and mop or wet vac. 6. Once dry, the floor is ready for any desired treatment

Type: Heavy duty solvent type coating remover
Properties
Colors: Straw
Odor: Solvent
Toxicity: Harmful if swallowed,
use good ventilation
Flammability: Extremely Flammable,
Composition: Biodegradable surfactants, and non-chlorinated solvents.
Material Safety Data
for HotStrip
SUPPLIER IDENTIFICATION
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
386-252-4243

Emergency Phone Number:
1-800-535-5053

HotStrip may be used to comply with OSHA's Hazard Communication Standard (HCS), 29 CFR 1910, 1200. Standard must be consulted for specific requirements.

The precise composition of this product is proprietary information. A more complete disclosure can be provided in the event of a medical emergency.

NFPA
National FireProtection Association
TOXICITY [HEALTH]
2
FIRE
3
REACTIVITY
0
SPECIAL
B
NFPA Number Codes
4 - Extreme
3 - High
2 - Moderate
1 - Slight
0 - Insignificant

HMIS
Hazardous Materials Identification System
HEALTH
2
FIRE
3
REACTIVITY
0
PROTECTION
HMIS Number Codes
4 - Severe
3 - Serious
2 - Moderate
1 - Slight
0 - Minimal

HMIS Protective Equipment Codes
A - safety glasses
B - safety glasses and gloves
C - safety glasses, gloves and an apron
D - face shield, gloves and an apron
E - safety glasses, gloves and a dust respirator
F - safety glasses, gloves, apron and a dust respirator
G - safety glasses, a vapor respirator
H - splash goggles, gloves, apron and a vapor respirator
I - safety glasses, gloves and a dust/vapor respirator
J - splash goggles, gloves, apron and a dust/vapor respirator
K - airline hood or mask, gloves, full suit and boots



The Material Safety Data provided on this website is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guide for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered as a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other material or in any process, unless specified in the text.

Product will perform as indicated by product specification sheet. Any adulteration will negate LunaCrete liability.
Evaluation for OSHA HCS: Hazardous

GENERAL INFORMATION
Chemical Family: Mixture

HAZARDOUS INGREDIENTS

Principal Hazardous Components
Methyl Isobutyl ketone (108-10-1)
Threshold Limit Value (Units) 100 ppm (OSHA)

Propanol(2-methoxy-methylethoxy-)(34590-94-8)
Threshold Limit Value (Units) 100 ppm (OSHA)

Petroleum naphtha (64742-94-5)
Threshold Limit Value (Units) 25 ppm

PHYSICAL DATA

Boiling Point (ºF) 117-370
Specific Gravity (H20=1) 0.90
Vapor Pressure (mm Hg) NE
Percent Volatile By Volume NE
Vapor Density (Air=1) >1
Evaporation Rate (H2O=1) ~1
Solubility in Water Disperses
pH NA
Appearance & Odor: Straw colored liquid with mild solvent odor

FIRE & EXPLOSION HAZARD DATA

Flash Point (Test Method): 80 F (TCC)
Flammable Limits:
LEL NE UEL NE
Extinguishing Media: Foam, water spray or fog, do not use water jet. Dry chemical, sand or earth or CO2.
Special Fire Fighting Procedures: Wear NIOSH/MSHA approved self contained breathing apparatus if product is involved in a fire. Cool fire exposed containers with water spray.
Unusual Fire & Explosion Hazards: Containers exposed to high heat may rupture and vent flammable vapors.

HEALTH HAZARD DATA
OSHA Permissible Exposure Limit NE
ACGIH Threshold Limit Value NE
Carcinogen - NTP Program NO Carcinogen - IARC Program NO
Symptoms of Over Exposure: Eyes: Irritation, burning, redness, blurred vision.
Inhalation: Drowsiness, dizziness, coughing, difficulty breathing, narcosis.
Ingestion: Nausea, diarrhea, irritation, burning.
Skin: Irritation, drying, burning sensation, defatting.
Medical Conditions Aggravated by Exposure: NE
Primary Route(s) of Entry: Skin, Inhalation
Emergency First Aid: EYES: Flush eyes thoroughly with water for 15 minutes, lifting both eyelids. If irritation persists, Get Medical Help.
ON SKIN: Flush off with water, then soap and water. If irritation develops, Get Medical Help. Remove and launder contaminated clothing before reuse.
IF SWALLOWED: Do not induce vomiting. Drink two glasses of water to dilute and Get Immediate Medical Help.
INHALATION: Remove to fresh air immediately. If breathing difficulty persists, Get Medical Help.

REACTIVITY DATA
Stability
Stable
Conditions to Avoid: Open flames or sparks and temperatures above 100˚ F (38˚ C)
Incompatibility Materials to Avoid: Strong oxidizing agents
Hazardous Polymerization No
Conditions to Avoid: NA
Hazardous Decomposition Products: Organic vapors, possible CO

ENVIRONMENTAL PROTECTION PROCEDURES
Spill Response: Remove all sources of flame or sparks. Ventilate the area. Soak up on absorbent material and store in a sealable container. Allow remaining solvent to evaporate with good ventilation. Flush off remaining surfactant with water.
Do not allow the product to enter streams or waterways. The solvent is toxic to fish and marine life.
Waste Disposal Method: Seal container and dispose of in an approved waste disposal site as required by local and federal regulations.

SPECIAL PROTECTION INFORMATION
Eye Protection: Goggles when spraying
Skin Protection: Solvent resistant gloves
Respiratory Protection (Specific Type): NA
Ventilation Recommended:
General Mechanical
Other Protection: NA
Hygienic Practices in Handling & Storage: Wash hands after handling. Do not contaminate food or feed stuffs.
Precautions for Repair & Maintenance of Contaminated Equipment: Rinse thoroughly with water before handling.
Other Precautions: Store in original sealed container only. Read all label precautions before using the product.

TRANSPORT INFORMATION
Identification Number UN 1993
Proper shipping name Flammable liquid n.o.s.
Class/Division 3
Packaging Group II



For additional information contact:
LunaCrete®
1111 H. Enterprise Court
Holly Hill, FL 32117
(866) 386-9122 - Toll Free